How much does it cost to put a well on a land?

After purchasing a land, you will have two methods to get water to it. The first method would be to get water supplied to your land through the lines. If there is no water supply, the only option available for you to consider would be drilling a land. This is where you will come across the need to understand how much money you will have to spend on drilling a well on your land.

What is the average cost of drilling a well?

On average, the cost of drilling a well would be from $1,500 to $12,000. If you want to drill a well for around 150 feet, you will have to spend around $5,500 to get the job done. This is the average depth of a well in the United States. Based on that, it is possible to consider that it would usually take around $15 to $30 for you to drill one foot of depth. However, if you are trying to drill a well on a challenging terrain, you will have to spend around $50 per foot in order to proceed with drilling the well. This would skyrocket your expenses as well. If you are not ready to spend such a lot of money on drilling a well, you are encouraged to purchase an appropriate piece of land. This will help you to keep the costs low as much as possible.

Different types of wells and the cost to get them

There are many different types of wells available out there for you to consider. Depending on your purpose, you need to make sure that you are going forward with the appropriate type of well. Let’s take a look at some of the most prominent types of wells available for you to get, along with the cost that you will have to bear on them.

• Artesian Well

Artesian Wells are quite expensive to drill. That’s because you will have to drill them deep until you end up with hitting an aquifer. Due to the same reason, you will have to spend around $25 to $80 for drilling an Artesian Well. In most of the instances, you will have to drill an Artesian Well for a range from 150 to 450 feet. Therefore, you will have to spend at least $5,000 to drill an Artesian Well. It could be high as $15,000 as well.

There are some benefits that come along with Artesian Wells as well. For example, within the aquifer, groundwater will be trapped within the layers of rock. This will be a pressurized body of water. Hence, the pressure would make the water to flow naturally. You will not come across the need to use electricity or a pump to get the job done. On the other hand, the ongoing expenses associated with an Artesian Well are relatively low as well. However, you need to make sure that you are locating the right place for the aquifer to work and provide the positive results to you.

• Geothermal Well

When you are drilling a Geothermal Well, you will have to spend around $15 to $40 per foot. Based on that, it would usually cost around $3,500 to $5,000 for you to drill a well. The Geothermal Wells would usually have a diameter of around six inches. Such a well can even have a range of around 150 to 400 feet in depth.

In case if you have a 1,500 feet Geothermal Well in your land, you will need to make sure that you are having dual 300 feet wells as well. This will help you to cater to the HVAC needs. There is a need to use specialized equipment when getting this kind of a well. Hence, you will have to spend relatively more money out of your pocket in getting a Geothermal Well.

• Irrigation Well

If you buy the land for agricultural purposes, you will come across the need to drill an Irrigation Well. Drilling an Irrigation Well will cost you a decent amount of money as well. That’s because you will be spending around $25 to $50 foot to drill. However, the overall cost can sometimes go up to $80 or even $100 depending on the nature of land you have.

Depending on the purpose, you will come across the need to get a high-yield generating commercial grade well. This kind of a well would usually cost around $50,000 to $100,000. But if you are going to drill an irrigation well and that that for residential purposes, you will be able to get the job done for around $10,000 to $15,000.

The main reason why a commercial Irrigation Well would cost more money is because you will need to drill a bigger borehole. Otherwise, you will not be able to get the amount of water that is needed for agricultural purposes. You need to make sure that you are at least getting 6 gallons of water per minute out of your well.

• Residential Well

The cost of getting a Residential Well would range around $25 to $65 per one square foot. Hence, the overall cost of getting a Residential Well would be around $3,500 and $15,000. This would include the cost of pumping, drilling, casing, wiring, and other related expenses. The biggest factors that determine the cost of getting a Residential Well would be the depth of the well and the diameter of it.

If you want to drill a shallow Residential Well, you will only be spending around $1,800 to $3,000 on it. People who can find water by drilling a shallow well will only need to have it for a diameter ranging between 3 to 10 feet. However, you will have to go for a depth of around 25 feet to 50 feet. You need to make sure that there is no bedrock in the area that you are going to drill the well. If there is a bedrock, you will have to spend more money. Moreover, you will have to use stone, concrete, and brock to keep your Residential Well away from caving in as well.

• Sandpoint Well

People who need to get water only for a temporary period of time can think about getting a Sandpoint Well. A Sandpoint Well would usually provide water at a flow of around 3 gallons per minute. This kind of a well would usually cost around $300 to $3,000 for you. This will be one of the most cost-effective options available for anyone o get a well. On the other hand, any homeowner will be able to get a Sandpoint Well installed on their own as well. However, you need to understand that the Sandpoint Well you install would deliver a low output. It might not be able to hold a consistent pressure as well.

The Sandpoint Well are pretty much similar to dug wells in terms of depth. You will be using a steel pipe that has a diameter of around 2 inches to get water. The steel pipe would have a length of around 20 feet as well. There is also a screen, which will filter water and keep sand away. You will be able to get a hand pump or a jet to have water. On top of that, you may also be able to get a small tank installed as well.

Important factors that would determine the cost of drilling a well

As mentioned earlier, there are few important factors, which would determine the overall cost of drilling a well. Let’s take a quick look at all those factors. Then you can proceed with getting a clear understanding about the cost of drilling a well.

• Depth of the well

One of the biggest factors that determine the cost of your well will be its depth. If the depth is high, you will end up with spending more money on drilling. This is something that every person should keep in mind when drilling a well.

If you are only drilling a shallow well, you will have to reach a depth of around 25 feet. However, the average depth of a well would be around 100 feet to 300 feet. A shallow well will only have a low diameter as well. The diameter would only be around 4 to 10 inches.  If you are going to drill the well deep, you need to make sure that it has a diameter of at least six inches. You should adhere to the appropriate conditions when drilling a well, so that you can refrain from problems that are created by contamination.

• Ground conditions

Overall ground conditions would also create an impact on the cost that you will have to bear when drilling a well. Therefore, you should never ignore the ground conditions and proceed with drilling the well. In fact, the ground conditions would clearly represent how difficult it would be to proceed with drilling the well.

For example, some of the grounds have heavy clay and lots of rocks. Then you will have to use specialized equipment and spend more effort on it. This will not be the smartest idea available or you to consider when you are drilling the well as well. Therefore, it is better if you can pick a location where you can find favorable ground conditions for drilling a well. Then you will be able to proceed with the task of drilling your well, without encountering any major challenges.

• Labor costs

You can’t simply ignore the labor costs when you are drilling the well. All the labor costs should be taken into consideration, so that you can make the right choice and drill the well. Some people think about drilling wells on their own. However, we don’t encourage you to do this, unless you have previous experience, and you have all the equipment to use. That’s because the process of drilling a well on your own can be risky. You shouldn’t be taking any such risks.

At the time of drilling a well, there’s a possibility for you to come across numerous problems. When you come across such problems, you will not have a clear understanding on how to fix them. As a result, you will tend to fix them in the expensive way. This would usually cost you a lot of money in the long run. Hence, you should always be getting expert assistance before you drill a well.

There are numerous other factors that can contribute towards the labor costs. They include permits, pumps, and water tanks. When you are working with an expert service provider, you can make sure that you are going for a professional installation at all times. This will also help you to end up with making reliable estimates. This will help you to save your money in the long run.

You can get in touch with the different service providers who drill wells in your local area and get to know about their prices. You can simply request for quotes. Then you can pick a reasonable company out of them and proceed with drilling your well.

• Permits

In some of the instances, you will have to obtain a permit to drill a well. This would vary based on your location. The permit would cost you around $300 to $700. If you are going to drill a well for residential purposes, you will have to go through numerous inspections as well, which would ensure that you are drilling it in the right way. Make sure that you obtain the appropriate permits and proceed with drilling the well.

Final words

By going through these facts, you know how much money you have to spend out of your pocket for drilling a well. keep these expenses in mind and proceed with drilling your well. Then you can plan and budge the project accordingly, so that you will not come across any issues.